Fully removable cooling unit to facilitate maintenance.

Preservation performances and temperature uniformity within the cell guaranteed at 5-HEAVY DUTY (40°C) working conditions according to EN16825:2016 test protocol.

Adjustable temperature range from -15°C to -22°C.

Hot gas automatic evaporation of defrost water.

Large digital white-digit display with humidity selection button (3 preset level), internal temperature display and setting, manual activation of defrost cycle and turbo frost cycle (to rapidly cool warm loads).

Zanussi Professional Fridge Control APP make the life easier for our customers: ​
- Monitor safety of preservation process thanks to HACCP data & alarms for precise control​
​- Save time and easy data management having the possibility to send the HACCP information in excel format directly to e-mail address​
- Quick operations:​ set the cabinet temperature/turbocooling​ and set date/hour

0mm clearance installation space: tower configuration cooling unit guarantee performance with frontal ventilation only; this unique solution allows installation against the wall or side by side with other appliances, even on the cooling unit side to maximize the use of kitchen space.

Combination of doors and drawers to suit any configuration needed, with the possibility to change the configuration on site. Right cooling unit available on request.

Fully compliant HACCP digital control: when temperature exceeds critical limits, acoustic and visual alarms are activated. Up to two months of event are kept in memory.

Tropicalized unit.

Anti-tilt runners accept GN 1/1 containers.

Self closing stainless steel doors (< 90°).

Prearranged to fit RS485 port to facilitate connection to a remote computer and integrated HACCP systems.

Mounted on stainless steel feet to give 150 mm (-5/+50 mm) clearance for ease of cleaning the floor.

External bottom panel in stainless steel.

External back panel in galvanized steel.

2 compartments with 2 doors.

Built-in refrigeration unit.

Ease of cleaning and high hygiene standards thanks to the rounded internal corners, the easily removable runners, grids and air conveyors.

Internal structure with 15 charging positions (3 cm pitch) available to host GN 1/1 grids, ensuring higher net capacity and a greater storage space.

Interior base with rounded corners, pressed from a single sheet.

Developed and produced in ISO 9001 and ISO 14001 certified factory.

Worktop in AISI 304 Stainless steel with a 50 mm profile.

If needed, working top can be removed for easier handling during installation (in case of narrow doors).

Anti-drip profile on stainless steel worktop edge.

Internal and external doors, front and side panels and removable worktop in AISI 304 Stainless steel.

Fault code display.