Modular Cooking Range Line
EVO900 4 Zone Electric Induction Cooking Top 392278
4-zone (5 kW each) electric induction cooking top
- Features
- Specifications
- Documents
-
Pots diameter to be used : min 12cm, max 28 cm in order to obtain maximum heating efficiency.
-
Suitable for countertop installation.
-
Glass ceramic cooking surface with 4 independently controlled induction zones with a power of 5 kW per zone.
-
Almost the entire surface of the ceramic plate can be used without “dead” spots.
-
One indicating lamp for each zone located on control console.
-
Induction plates endowed with overheating safety device.
-
Power to the individual zones can be set with progressive output i.e. fine regulation at the lower and larger progress at the upper levels.
-
Low heat dissipation to the kitchen.
-
The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface.
-
IPX5 water protection.
-
Unit is 900mm deep to give a larger working surface area.
-
All exterior panels in Stainless Steel with Scotch Brite finishing.
-
AISI 304 stainless steel worktop, 2mm thick.
-
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Electric
- Supply voltage: 380-415 V/3 ph/50/60 Hz
- Total Watts: 20 kW
- Predisposed for: 380-415V 3~ 50/60Hz 20kW
Key Information:
- Induction Top Dimensions (width): 800 mm
- Induction Top Dimensions (depth): 900 mm
- Net weight: 65 kg
- Shipping weight: 76 kg
- Shipping height: 540 mm
- Shipping width: 1010 mm
- Shipping depth: 860 mm
- Shipping volume: 0.47 m³
- Induction compatible pots & pans must be used.
- Certification group: IH940