24,5-lt gas pasta cooker with 1 well
- Features
- Specifications
- Documents
- Accessories
-
In addition to cooking pasta, the appliance can be used for noodles of every kind, rice, dumplings and vegetables.
-
High efficiency 10.5 kW burners in stainless steel with flame failure device and optimized combustion, located below the well.
-
No electrical connection needed.
-
Water basin in 316 type Stainless steel.
-
Water basin is seamlessly welded into the top of the appliance.
-
Provided with integrated drip zone on which baskets can be placed for draining purposes.
-
24.5 liters water basin.
-
Unit to feature skimming zone for starch removal: improved water quality over time.
-
Easy-to-use control panel with gas cock and piezo ignition.
-
Safety thermostat to avoid operation without water.
-
Continuous water filling regulated through a manual water tap.
-
Large drain with manual ball-valve for fast emptying of well.
-
Automatic lifting system (optional accessory): 200mm wide unit with two stainless steel basket supports, holding one GN 1/2 basket each, to be placed on either or both sides of machine to provide automatic lifting for four small portion baskets (to be ordered separately). Possibility to memorize nine cooking times through digital control.
-
All major compartments located in front of unit for ease of maintenance.
-
Unit delivered with four 50 mm legs in stainless steel as standard (all round Stainless steel kick plates as option).
-
IPx4 water protection.
-
All exterior panels in Stainless Steel with Scotch Brite finishing.
-
One piece pressed 1.5 mm work top in Stainless steel.
-
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Gas
- Gas Power: 11.5 kW
- Standard gas delivery: Natural Gas G20 (20mbar)
- Gas Type Option: LPG
- Gas Inlet: 1/2"
Key Information:
- Usable well dimensions (width): 250 mm
- Usable well dimensions (height): 300 mm
- Usable well dimensions (depth): 400 mm
- Well Capacity (MAX): 24.5 lt MAX
- Net weight: 50 kg
- Shipping weight: 47 kg
- Shipping height: 1130 mm
- Shipping width: 460 mm
- Shipping depth: 820 mm
- Shipping volume: 0.43 m³
- If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.
- Certification group: N7ECPG
Water:
- Drain "D": 1"
- Incoming Cold/hot Water line size: 1/2"
- Total hardness: 5-50 ppm
Brochures
Range overviews
CAD Drawings
Data Sheet
BIM/Revit
Included Accessories
