Modular Cooking Range Line
EVO700 Gas Solid Top on Gas Oven 372008
Gas solid top (7 kW) on gas oven (6 kW), full module
- Features
- Specifications
- Documents
- Accessories
-
Gas heated, 7 kW central burner, solid top.
-
Durable cast iron cooking plate, easy to clean.
-
The center of the plate can reach a maximum temperature of 500 °C while decreasing outwards.
-
Central burner with optimized combustion, flame failure device and protected pilot light.
-
Temperature gradients to satisfy different cooking needs, provided over the whole plate thanks to the temperature fine-tuning by zone.
-
Various sizes of pans can be used at the same time due to large surface area with no intermediate sectors.
-
Pans can easily be moved from one area to another without lifting.
-
Base compartment consists of a gas heated standard oven with stainless steel burners and self stabilizing flame positioned beneath the base plate. Stainless steel oven chamber to have 3 levels of runners to accomodate 2/1 GN shelves (2 steam pans) and ribbed enamelled steel base plate.
-
Oven thermostat adjustable from 110 °C to 270 °C.
-
All major compartments located in front of unit for ease of maintenance.
-
IPx4 water protection.
-
All exterior panels in Stainless Steel with Scotch Brite finishing.
-
One piece pressed 1.5 mm work top in Stainless steel.
-
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Gas
- Gas Power: 13 kW
- Standard gas delivery: Natural Gas G20 (20mbar)
- Gas Type Option: LPG
- Gas Inlet: 1/2"
Key Information:
- Solid top usable surface (width): 690 mm
- Solid top usable surface (depth): 595 mm
- Oven working Temperature: 110 °C MIN; 270 °C MAX
- Oven Cavity Dimensions (width): 540 mm
- Oven Cavity Dimensions (height): 300 mm
- Oven Cavity Dimensions (depth): 650 mm
- Net weight: 95 kg
- Shipping weight: 116 kg
- Shipping height: 1140 mm
- Shipping width: 820 mm
- Shipping depth: 860 mm
- Shipping volume: 0.8 m³
- If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.
- Certification group: N7TG
Brochures
Range overviews
CAD Drawings
Data Sheet
BIM/Revit
Included Accessories
