Modular Cooking Range Line
EVO700 Full Module Gas Fry Top, Smooth Polished Chrome Plate with Open base 372040
Gas fry top with smooth polished chrome cooking plate, sloped, open base, thermostatic control, full module
- Features
- Specifications
- Documents
- Accessories
-
Frontal simmering zone.
-
Temperature range from 100° up to 280°C.
-
Polished chromium surface avoids the mixing of flavors when passing from one type of food to another.
-
Cooking surface 12mm thick polished chrome for optimum grilling results and ease of use.
-
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
-
Large drain hole on cooking surface permits the draining of fat into large 1,5 liter collector placed under the cooking surface.
-
Large grease collection container available as optional accessory to be installed under top units over open base cupboard.
-
Stainless steel high splash guard on the rear and sides of cooking surface. Splash guard can be easily removed for cleaning.
-
Piezo spark ignition for added safety.
-
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
-
IPx4 water protection.
-
Cooking surface completely smooth.
-
All exterior panels in Stainless Steel with Scotch Brite finishing.
-
One piece pressed 1.5 mm work top in Stainless steel.
-
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Gas
- Gas Power: 14 kW
- Standard gas delivery: Natural Gas G20 (20mbar)
- Gas Type Option: LPG
- Gas Inlet: 1/2"
Key Information:
- Cooking surface width: 730 mm
- Cooking surface depth: 540 mm
- Working Temperature MIN: 100 °C
- Working Temperature MAX: 280 °C
- External dimensions, Width: 800 mm
- External dimensions, Depth: 700 mm
- External dimensions, Height: 850 mm
- Net weight: 80 kg
- Shipping weight: 94 kg
- Shipping height: 1140 mm
- Shipping width: 820 mm
- Shipping depth: 860 mm
- Shipping volume: 0.8 m³
- If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.
- Certification group: N7RG
Brochures
Range overviews
CAD Drawings
Data Sheet
BIM/Revit
Included Accessories
Detergents and Chemicals (not included)
