Modular Cooking Range Line
EVO700 Full Module Electric Fry Top, Smooth Polished Chrome Plate 372194
Electric fry top with smooth polished chrome cooking plate, sloped, thermostatic control, full module
- Features
- Specifications
- Documents
- Accessories
-
Frontal simmering zone.
-
Temperature range from 120° up to 280°C.
-
Polished chromium surface avoids the mixing of flavors when passing from one type of food to another.
-
Cooking surface 12mm thick polished chrome for optimum grilling results and ease of use.
-
Infrared heating elements mounted below the cooking surface.
-
Suitable for countertop installation.
-
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
-
Large drain hole on cooking surface permits the draining of fat into large 1,5 liter collector placed under the cooking surface.
-
Large grease collection container available as optional accessory to be installed under top units over open base cupboard.
-
Safety thermostat and thermostatic control.
-
Stainless steel high splash guard on the rear and sides of cooking surface. Splash guard can be easily removed for cleaning.
-
IPx4 water protection.
-
Cooking surface completely smooth.
-
All exterior panels in Stainless Steel with Scotch Brite finishing.
-
One piece pressed 1.5 mm work top in Stainless steel.
-
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Electric
- Supply voltage: 400 V/3 ph/50/60 Hz
- Electrical power max.: 8.4 kW
- Total Watts: 8.4 kW
- Predisposed for: 380-400V 3~ 50/60Hz 7.6-8.4kW
Key Information:
- Cooking surface width: 730 mm
- Cooking surface depth: 540 mm
- Working Temperature MIN: 120 °C
- Working Temperature MAX: 280 °C
- External dimensions, Width: 800 mm
- External dimensions, Depth: 700 mm
- External dimensions, Height: 250 mm
- Net weight: 70 kg
- Shipping weight: 73 kg
- Shipping height: 530 mm
- Shipping width: 820 mm
- Shipping depth: 860 mm
- Shipping volume: 0.37 m³
- If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.
- Certification group: N7RE
Brochures
Range overviews
CAD Drawings
Data Sheet
BIM/Revit
Included Accessories
Detergents and Chemicals (not included)
